In continuation to my previous blog "PREPARING HIKVISION 4 CHANNEL DVR DS-7100 FOR INSTALLATION AND PASSWORD RESET (SOLVED)"which is part-1 of My Main Topic "Installation of 4 Channel DVR in DIY Model". After getting into the DVR settings, I was confident enough to install the cameras at desired locations at my home connected the DVR with 2 of 3 cameras I have. There is some problem with the third camera, which I will be discussing later. In the current blog post I will be discussing another issue faced by me, that is, 5 Beeps when whole system got connected and I was already viewing the display of 2 cameras on my led TV.
First of all, I thought that there must be some hardware issue keeping in view the history of other hardware I have dealt in past, hence I started searching online for possible cause and its solution. I found a few blogs and YouTube videos suggesting hard disk problem which I then tried to identify in my DVR but there was no such issue as hard disk was properly installed and detected by the DVR. I also tried to format the hard disk which did not create any effect on the Beeping.
The Solution
I went across a YouTube Video suggesting that the CVBS Output Standard under General Tab should be changed from NTSC to PAL and Wow the problem was flushed out like it was never existed.
I hope my blogpost will help you guys.
regards,
Comments
Post a Comment