Mis reseñas - As I See

Security cameras have lately become need of the time now days. You can see security cameras installed almost at every shopping mall, small shops, homes and even at the freeways. These cameras have proved to be helping in identification and specifying the causes and effects of incidents and in some cases these cameras help the court in better judgement.  Keeping in view all of the above, we also decided to opt the installation of Security Cameras at our home in order to be aware of the surrounding and avoid unforeseen and unknown incidents. I went to the market and asked for the prices, and trust you me, I was stunned to see the hike in prices since I last visited the market. Prices were almost doubled and were definitely out of my league. Hence, I decided to look for the option of buying used Security Camera System and started looking at the Daraz, OLX and Facebook Market Place. I have discussed the whole subject in my earlier blogpost with the title " Purchaing 2nd Hand Hikvision...

In continuation to my previous blog " PREPARING HIKVISION 4 CHANNEL DVR DS-7100 FOR INSTALLATION AND PASSWORD RESET (SOLVED) "which is part-1 of My Main Topic " Installation of 4 Channel DVR in DIY Model ". After getting into the DVR settings, and solving the 5 beeps problem, the device started working perfectly but the display was on local screen installed within home but displayed data on my cell phone was yet to be done. First thing first, I started searching google for the simplest solution to get the display on my phone. I went across a lot of blogs and videos on YouTube. There are so many similar methods once again, so I also opted one of  the most common method which was to install Hik-Connect tool for android  from Android Play Store and try to bind the device using the QR code from Configurations of my DVR. It could not bind because DVR was already bound with the cell phone number of first owner. I again went to the google for searching for the solutions of...

In continuation to my previous blog " PREPARING HIKVISION 4 CHANNEL DVR DS-7100 FOR INSTALLATION AND PASSWORD RESET (SOLVED) "which is part-1 of My Main Topic " Installation of 4 Channel DVR in DIY Model ". After getting into the DVR settings, unbinding device and solving the 5 beeps problem, the device started working perfectly and also displayed data on my cell phone. I had set all the parameters as per requirements, also the current date and time was set as shown in picture below but as soon as the DVR was restarted, the settings remain intact but the current date and time vanished and DVR went back to its manufacturing date and time settings, which were, 01-01-2012 Sun 00:00:00. I then tried to set the date and time again and deliberately restarted the DVR and result was the same "factory date and time". So once again I have had a new challenge to identify and solve the problem being faced. I started my research on the topic and came across multiple po...

In continuation to my previous blog " PREPARING HIKVISION 4 CHANNEL DVR DS-7100 FOR INSTALLATION AND PASSWORD RESET (SOLVED) "which is part-1 of My Main Topic " Installation of 4 Channel DVR in DIY Model ". After getting into the DVR settings, I was confident enough to install the cameras at desired locations at my home connected the DVR with 2 of 3 cameras I have. There is some problem with the third camera, which I will be discussing later. In the current blog post I will be discussing another issue faced by me, that is, 5 Beeps when whole system got connected and I was already viewing the display of 2 cameras on my led TV.  First of all, I thought that there must be some hardware issue keeping in view the history of other hardware I have dealt in past, hence I started searching online for possible cause and its solution. I found a few blogs and YouTube videos suggesting hard disk problem which I then tried to identify in my DVR but there was no such issue as hard...

In continuation to my previous blog " Purchaing 2nd Hand Hikvision 4 Channel DVR and Cameras Online - Market Survey "which is part-1 of My Main Topic " Installation of 4 Channel DVR in DIY Model ". In the current blog post I will be discussing the one of the pre-installation steps. Preparing Equipment Prior Installation In the last post I mentioned the way I purchased Hikvision equipment and also stated the issue of purchased hardware. This post will be talking about preparing the equipment which starts from powering on the DVR. As I stated in my last post that there was no power adapter with the package purchased, so i had to arrange the power module for DVR. The sticker pasted underneath the DVR States input power rating as 12V == 1.5A. I started searching for the power adapter online and in the meantime I also searched my personal inventory at home and found adapter of 12V == 1.0A which was earlier used for PTCL internet router 😆😆😆, picture displayed aside. D...

Installation of security CCTV system has become a need instead of a desire in current world economic situation. I this drop back, I have also decided to opt the purchasing and installation of CCTV system at my home. In this blog post, I will be covering almost all the aspects of CCTV starting from market survey, my budget, installation issues and post installation details. This blog might get a bit lengthy due to the detailed process so i have decided to bifurcate the blog post and generate a few smaller posts which will be easy to read and comprehend as well as it will be related to specific issue. Part 1: Market Survey This first post will cover the market survey in Pakistan in July 2023 and purchasing part mostly. So lets start. Whole working on CCTV started a while ago when we visited friend's place for dinner where we saw the functional CCTV system as they were able to see roadside parked vehicles as well as their main door whenever their doorbell rang. All that inspired us a ...