Skip to main content

Binding AWS VPS IP Address with Hostinger Subdomain

By
Bind AWS IP with Hostinger Sub-Domain To bind an AWS IP address to a Hostinger subdomain, you need to update the DNS records of your Hostinger domain to point to the AWS IP address. Here’s a step-by-step guide to achieve this: Step1: Find the AWS IP Address If you have an EC2 instance, you can find the IP address in the AWS Management Console under the "Instances" section. Note the Public IPv4 address. Step2: Access Hostinger DNS Management Log in to your Hostinger account. Go to the "Domains" section and select the domain for which you want to configure the subdomain. Navigate to the "DNS Zone" or "DNS Settings" for that domain. Step3: Create a Subdomain and Point to AWS IP In the DNS settings, create a new A record. Set the "Name" or "Host" field to your subdomain (e.g., subdomain.yourdomain.com ). Set the "Points to" or "Value" field to your AWS IP address. Set the TTL (Time to Live) to the default value...
Post a Comment

ASIC - Hikvision DVR Forgets Date Time (Solved)

Image
By


date and time setting page
In continuation to my previous blog "PREPARING HIKVISION 4 CHANNEL DVR DS-7100 FOR INSTALLATION AND PASSWORD RESET (SOLVED)"which is part-1 of My Main Topic "Installation of 4 Channel DVR in DIY Model". After getting into the DVR settings, unbinding device and solving the 5 beeps problem, the device started working perfectly and also displayed data on my cell phone. I had set all the parameters as per requirements, also the current date and time was set as shown in picture below but as soon as the DVR was restarted, the settings remain intact but the current date and time vanished and DVR went back to its manufacturing date and time settings, which were, 01-01-2012 Sun 00:00:00. I then tried to set the date and time again and deliberately restarted the DVR and result was the same "factory date and time".


Hikvision DVR CMOS Battery
So once again I have had a new challenge to identify and solve the problem being faced. I started my research on the topic and came across multiple posts and videos over the web stating similar problems with similar kind of solutions, where changing the CMOS battery was one of the common solutions. CMOS battery usually deteriorates with time and it is required to be replaced which makes sense so I took out the battery and took it to market with me to find its replacement. The replacement battery was available in PKR 300 which is quite nominal price so I bought and installed new battery and restarted the DVR. This time I performed date and time settings and deliberately restarted the DVR after couple of minutes to see the impact. The magic of CMOS battery worked like a charm and DVR did not forget its current date and time.

SOLUTION

In my opinion, changing the CMOS battery performed the magic and solved the problem in my case. I recommend that you should first try to set the date and time for couple of times and try to restart your DVR. If the problem persists then go for change of CMOS battery instead of other hit and trial methods which are provided widely over the internet. Save your precious time and commodity that is your DVR.

regards,


Labels:

Comments

Post a Comment

Popular posts from this blog

ASIC - Adsense1 or Adsense2 Error (Solved)

By
Whenever one tries to save the HTML Template of Blogger, some error appears in the left bottom corner. One of these errors is "The widget settings in widget with id <b>AdSense1</b> is not valid. An internal error occurred. Please try again." or  "The widget settings in widget with id <b>AdSense2</b> is not valid. An internal error occurred. Please try again." . Here is a simplest solution to the problem. Follow the below given steps to resolve this problem. 1. Click on the Jump to Widget button as shown in the picture 1. You will see list of all active widgets here. 2. Select the widget Adsense1 or Adsense2 according to your error message. The code for Adsense1 or Adsense2 as per your selection will appear as shown in selected code in picture 2. 3. Add following code in the place as below. BLACK color code is the Actual Code just copied for your infomation. Code in RED color is the code which you will add in the beginning and ending.      ...
Post a Comment
Read more

ASIC - Change GRUB 2 Boot Order (solved)

By
 I was using Windows 10 Pro on my Dell Latitude 3340 Laptop but due to some work requirement I needed to install Ubuntu 22.04, details to is available in my earlier blog-post " Dual Boot Windows and Ubuntu (Solved) ". After the installation, the default OS in boot menu displayed by GRUB 2 is Ubuntu which sometimes irritates as most of my work is being handled in the Windows environment, moreover, i wanted to change the delay time from 30 seconds to 10 seconds in order to avoid further unnecessary delay. So, as usual, i went across the google and watched multiple videos and blogs in order to see the correct method of solving my problem. The easiest and the ultimate way of changing the boot order in GRUB 2 is presented below: 1. You will need "grub-customizer" for the subject task. Note: grub-customizer is not available in the distribution packages and cannot be installed with simple "sudo apt install grub-customizer" command at terminal. The package is av...
Post a Comment
Read more

ASIC - Titan Submersible - Catastrophic Incident

By
Titan Submersible Stats of Titan Name: TITAN ( previously Known as  Cyclops 2 ) Owner / Company: OceanGate Project Completion: 2018 Weight: 9,525 kg (21,000 lbs) Speed: 3 knots (3-1/2 miles per hour) Propeller: Electric Thrusters Life-Support System: Enough to keep five people alive for up to 96 hours Test depth:   Up to 4,000 m (13,000 ft) Capacity:  5 people Crew:  1 x pilot,  1 x technical expert,  3 x mission specialists/passengers Manufacturing Material: Walls: Carbon-fiber walls (5 inches ~ 13 cm thickness) Domes: T itanium Domes ( capped at each end ) Development Status:   Experimental (Risk of Injury or Death) Length: 6.7 m (22 ft) Beam: 2.8 m (9 ft 2 in) Height: 2.5 m (8 ft 2 in) History of Titan In 2013, OceanGate began working with the Applied Physics Laboratory (APL-UW) at the University of Washington to develop a titanium-hulled composite carbon fiber submersible with the tentative name Cyclops 2; OceanGate signed a settlement ...
1 comment
Read more